User`s guide

53220A/53230A User’s Guide 233
53220A/53230A Math, Graphing, and Data Logging 6
Setting the Duration
In terms of Time, the data logging duration is specified in hh.mm.ss format.
The value is set using the rotary knob and arrow keys, or using the [Shift]ed
numeric keys. By highlighting specific digits in the time window, greater reso-
lution (i.e. minutes and seconds) of the logging time can be specified.
The maximum data logging period is 99.00.00. The reading limit, however, is
1,000,000 readings which may occur before the time duration is reached.
In terms of Readings, data logging continues until the specified number of read-
ings are complete. The reading count is set using the rotary knob and arrow
keys, or using the [Shift]ed numeric keys. A maximum of 1,000,000 readings
can be specified.
For the Time Stamp measurement function, only reading duration is available.
Setting a Start Delay
When required, a delay can be set between the time the Run key is pressed, and
the start of data logging. The start delay is specified in hh.mm.ss format and
is set using the rotary knob and arrow keys, or using the [Shift]ed numeric
keys. By highlighting specific digits in the delay window, greater resolution
(i.e. minutes and seconds) of the delay time can be specified.