User`s guide

53220A/53230A User’s Guide 217
53220A/53230A Math, Graphing, and Data Logging 6
|MINimum|MAXimum|DEFault}
CALCulate2:TRANsform:HISTogram:RANGe:UPPer? [{MINimum
|MAXimum|DEFault}] (query form)
value - directly specifies the histogram lower and upper range values. The
value ranges are:
-1.0E+15 to -1.0E-15, 0.0, 1.0E-15 to 1.0E+15
The default lower and upper ranges and the ranges set following a reset
(*RST) or instrument preset (SYSTem:PRESet) are 0.0.
When setting the ranges, both a lower range and an upper range must be spec-
ified. Any of the following steps will prevent a “settings conflict” error
(e.g. lower range greater than upper range) due to the order in which ranges
are set:
• setting the upper range first
• setting both ranges on the same line programmatically
• enabling the histogram after the ranges are set
• setting the ranges automatically
Setting the Bin Ranges to Min and Max
With AutoRange Off, the Set to Min/Max softkey is another method for setting the
histogram bin ranges (lower and upper). Depending on the instrument state,
Set to Min/Max will set the ranges as follows: