Instruction manual

Contents
Programming Guide v
Commands for Displaying Results 3-47
Command for Displaying Raw Results 3-47
Commands for Displaying Relative Results 3-47
Commands for Enabling and Disabling the Display 3-47
Programming the Counter to Synchronize Measurements 3-48
Synchronizing Measurement Completion 3-48
Resetting the Counter and Clearing the Interface 3-48
Using the *WAI Command 3-49
Using the *OPC? Command 3-49
Using the *OPC Command to Assert SRQ 3-50
Writing SCPI Programs 3-52
Programming Examples 3-54
Using BASIC 3-54
Using C 3-55
List of the Programming Examples 3-55
Making a Frequency Measurement (BASIC) 3-56
Making a Frequency Measurement (QuickBASIC) 3-57
Making a Frequency Measurement (C) 3-58
4 Command Reference
Introduction 4-2
:ABORt Command 4-4
:DISPlay Subsystem 4-5
Group Execute Trigger (GET) 4-7
:INITiate Subsystem 4-8
:INPut Subsystem 4-9
:MEASure Subsystem 4-10
Measurement Instructions
(:CONFigure, :FETCh, :MEASure, :READ) 4-10
Descriptions of the Measurement Functions 4-16
How to Use the Measurement Instruction Commands 4-17
:MEMory Subsystem 4-20
[:SENSe] Subsystem 4-22
[:SENSe]:FUNCtion Subtree 4-27
[:SENSe]:POWer Subtree 4-29
[:SENSe]:ROSCillator Subtree 4-30