Instruction manual

Chapter 2 Command Summary
*RST Response
Programming Guide 2-19
2
*RST Response
The IEEE 488.2 *RST command returns the instrument to a specified
state optimized for remote operation. (Use *CLS to clear the status event
registers and the SCPI error queue.)
The states of command settings affected by the *RST command are
described in Table 2-3. Table 2-4 lists command settings that are
unaffected by *RST.
Table 2-3. Agilent 53150A/151A/152A *RST State
Command Header Parameter State
*
DDT <arbitrary block> #14INIT
:DISPlay[:WINDow]:BACKground[:STATe]
:DISPlay:ENABle
<Boolean>
<Boolean>
ON
ON
:INITiate:CONTinuous <Boolean> OFF
:INPut:FILTer:[:LPASs][:STATe] <Boolean> OFF
[:SENSe]:AVERage:[STATe]
[:SENSe]:AVERage:[COUNt]
[:SENSe]:FILTer:FM:AUTO
<Boolean>
<numeric_value>
<Boolean>
OFF
1
ON
[:SENSe]:CORRection:CSET:SELect
[:SENSe]:CORRection:CSET:STATe
[:SENSe]:FREQuency:OFFset
[:SENSe]:FREQuency:OFFset:STATe
[:SENSe]:FREQuency:RESolution
[:SENSe]:FREQuency:TRACking
[:SENSe]:FUNCtion:OFF
[:SENSe]:FUNCtion[:ON]
[:SENSe]:POWer:AC:REFerence
[:SENSe]:POWer:AC:REFerence:STATe
[:SENSe]:ROSCillator:SOURce
<character_data>
<Boolean>
<numeric_value>[frequency unit>
<Boolean>
<numeric_value>[frequency unit>
<character_program_data>
<sensor_function>
<sensor_function>
<numeric_value>
<Boolean>
INTernal | EXTernal <Boolean>
CORR1
OFF
0
OFF
1 Hz
SLOW
“FREQuency 1”,
“POWer 2”
“FREQuency 2”
0
OFF
INTernal
:TRIGger[:SEQuence]:HOLDoff <numeric_value> 0