Instruction manual

Chapter 2 Command Summary
Agilent 53150A/151A/152A Command Summary
2-18 Programming Guide
2
Table 2-2. Agilent 53150A/151A/152A SCPI Command Summary (Continued)
Keyword/Syntax Parameter Form Std/New Comments
:SYSTem
:COMMunicate
:GPIB
[:SELF]
:ADDRess
:SERial
[:RECeive]
:BAUD
:ERRor?
:KEY
:CATalog?
:VERSion?
<numeric_value>
<numeric_value>
Std
Std
Std
Std
Std
Std
Std
Std
Std
Std
Subsystem. Collects the functions that are
not related to instrument performance.
Subtree. Collects together configuration of
control/communication interfaces.
Subtree. Controls the GPIB.
Sets the GPIB address of the instrument.
Subtree.
Sets the baud rate.
Query only. Queries the oldest error in the
Error Queue and removes the error from the
queue (first in-first out). See Chapter 5 for
error definitions.
Simulates the pressing of a front-panel key.
Query only. Returns a list of defined key
codes.
Query only. Returns the SCPI version
number with which the Counter complies.
:TRIGger
[:SEQuence]
:HOLDoff <numeric_value>
Std
Std
Subsystem.
When INIT:CONT ON, this command
specifies the length of the delay between
measurements.