Instruction manual

Chapter 2 Command Summary
Agilent 53150A/151A/152A Command Summary
2-16 Programming Guide
2
Table 2-2. Agilent 53150A/151A/152A SCPI Command Summary (Continued)
Keyword/Syntax Parameter Form Std/New Comments
[:SENSe] (cont.)
:FREQuency
:OFFSet
:STATe
<numeric_value>[frequency unit]
<Boolean>
Std
Std
New
Subtree. Controls the frequency-measuring
capabilities of the instrument.
Sets a reference frequency for all other
absolute frequency settings in the
instrument.
When STATe is ON, frequency
measurements are modified by the value of
FREQ:OFFset.
:RESolution
:TRACking
<numeric_value>[frequency unit]
<character_data>
FAST | SLOW | OFF
Std
New
Sets the frequency-measurement
resolution.
Selects one of three signal-tracking modes.
:FUNCtion
[:OFF]
[:ON]
:STATe?
:POWer
:AC
:REFerence
:STATe
:ROSCillator
<sensor_function>[,<sensor_function>]
"[XNONe]FREQuency [1 | 2]"
"[XNONe]POWer [2]"
<sensor_function>[,<sensor_function>]
"[XNONe]FREQuency [1 | 2]"
"[XNONe]POWer [2]"
<sensor_function>
<numeric_value>
<Boolean>
Std
New
Std
Std
Std
Std
Std
Std
Subtree. Selects the <sensor_function>(s)
to be sensed by the instrument.
Selects the <sensor_function>(s) to be
turned OFF.
Selects the <sensor_function> to be sensed
by the instrument.
Query that returns a Boolean value which
indicates whether the specified
<sensor_function> is ON or OFF.
Subtree. Configures the instrument for
power measurement on channel 2.
Sets a reference amplitude (in dB) for
display of power measurements.
Determines whether amplitude is measured
in absolute or relative mode.
Subtree. Controls the reference oscillator.
:SOURce <character_program_data>
INTernal | EXTernal
Std Sets the selection of a reference timebase
(INTernal or EXTernal).