Instruction manual

Chapter 2 Command Summary
Agilent 53150A/151A/152A Command Summary
Programming Guide 2-15
2
Table 2-2. Agilent 53150A/151A/152A SCPI Command Summary (Continued)
Keyword/Syntax Parameter Form Std/New Comments
:MEMory
:CLEAr[:NAME]
:DATA
:DATA?
:NSTates?
<name>
<name>, <data>
<name>
Std
Std
Std
Std
Std
Subsystem. Manages instrument memory.
Event; no query. Restores the frequency
values in the named correction profile to the
default values and sets all loss values to
zero.
Stores data in the named correction profile.
Queries the data in the named correction
profile.
Query only. Returns the number of available
*SAV/*RCL states in the instrument.
:READ Std See Measurement Instructions in this table.
[:SENSe]
:AVERage
[:STATe]
:COUNt
:CORRection
:CSET
:SELect
:STATe
:DATA?
:FILTer
:FM
:AUTO
<Boolean>
<numeric_value>
<character_data>
CORR1 | CORR2 . . . CORR9
<Boolean>
<data_handle>
"[XNONe]FREQuency [1 | 2]"
"[XNONe]POWer [2]"
<Boolean>
Std
New
New
New
Std
Std
Std
Std
Std
Std
Std
New
Subsystem setup commands.
Subtree. Configures the averaging function.
Turns averaging ON and OFF.
Specifies the number of measurements to
combine when AVERage:STATe is ON.
Subtree. Configures the power-correction
function.
Selects a power-correction profile.
When STATe is ON, power measurements
are modified according to the data in the
correction profile selected with :SELect.
Query only. Returns the current
measurement result data of the SENSe
subsystem.
Frequency on channel 1 or 2.
Power on channel 2.
Subtree. Controls the use of filtering
routines in the instrument.
Turns automatic FM compensation ON or
OFF.