Instruction manual

Chapter 2 Command Summary
Agilent 53150A/151A/152A Command Summary
Programming Guide 2-13
2
Table 2-2. Agilent 53150A/151A/152A SCPI Command Summary
Keyword/Syntax Parameter Form Std/New Comments
:ABORt Std Event; no query. Resets the trigger system
and aborts any measurement in progress.
Places the trigger system in the IDLE state.
:CONFigure Std See Measurement Instructions in this table.
:DISPlay
:ENABle
[:WINDow]
:BACKground
[:STATe]
<Boolean>
<Boolean>
Std
Std
New
Subsystem. Controls the selection and
presentation of textual information on the
display.
Controls whether or not the entire display is
visible.
Turns the LCD display backlight ON or
OFF.
:FETCh Std See Measurement Instructions in this table.
:INITiate
:CONTinuous
[:IMMediate]
<Boolean>
Std
Std
Std
Subsystem. Controls the initiation of
measurements.
Sets the instrument for continuously
initiated or user-initiated measurements.
Event; no query. Causes the instrument to
initiate and complete one full measurement
cycle.
:INPut
:FILTer
[:LPASs]
[:STATe]
<Boolean>
Std
Std
Std
Std
Subsystem. Controls the characteristics of
the instrument’s Channel 1 input port.
Subtree. Controls a filter that can be
inserted in the path of the measurement
signal.
Subtree. Selects the Low-PASs filter.
Enables or disables the Channel 1
low-pass filter (approx. 50 KHz).
:MEASure Std See Measurement Instructions in this table.