Instruction manual

Index
Programming Guide Index-3
Index
error queue, 5-2, 5-3
overflow
, 5-3
Error Types
, 5-4
ERRor?
, 2-18
errors list
, 5-7
ESB
, 3-29
EVENt
, 2-17, 4-33, 4-37
Event Enable Register
, 3-36
event enable register
, 3-33, 3-37
Event Register
, 3-35
event register
, 3-33, 3-37
Event Status Register Query
, 2-10, 4-47
EXE
, 3-31
Execution Error
, 5-5
Execution error
, 5-8
execution error
definition
, 5-5
status bit
, 3-32
expected_value
, 4-12, 4-13
Exponent too large
, 5-7
Expression data not allowed
, 5-8
Expression error
, 5-8
F
fall time, 4-27, 4-28
FETCh
, 2-13, 2-14, 4-10
FETCh?
, 4-11, 4-13
FILTer
, 2-7, 2-15, 4-9, 4-24
filter
, 2-13
FM
, 4-24
FM compensation
, 2-15
FM signals
, 4-24
FREQuency
, 2-5, 2-14, 2-16, 4-25, 4-26
frequency
, 4-16, 4-17, 4-27, 4-28
frequency modulation
, 4-24
frequency ratio
, 4-27, 4-28
frequency unit
, 2-16
frequency values
, 2-15
front panel to SCPI command maps
, 2-3
FUNCtion
, 2-5, 2-16, 4-28, 4-29
function
, 2-14, 4-12, 4-13, 4-27, 4-28
G
general-purpose functions, 2-12
GET
, 2-10, 2-11, 4-7
GET not allowed
, 5-7
Getting Started
, 1-3
GPIB
, 1-7, 1-9, 3-2, 3-5
address
, 3-6
operating modes
, 3-5
GPIB
, 2-18
GPIB address
, 2-18, 3-5, 4-39
GPIB cable
, 3-5
GPIB operating modes
Addressed (talk/listen)
, 3-5
group execute trigger
, 4-7
Group Execute Trigger (GET)
, 5-5
Group Execute Trigger, GET
, 4-7
H
Hardware error, 5-9
Hardware missing
, 5-9
Header separator error
, 5-7
Header suffix out of range
, 5-7
HOLDoff
, 2-18
holdoff
, 4-58
How to Use This Guide
, 1-3
I
Identification Query, 2-10
IEEE 488.1 Group Execute Trigger (GET)
, 4-56
IEEE 488.1 Interface capabilities
, 3-6
IEEE 488.2
, 2-9, 3-2
summary list
, 2-10
IEEE 488.2 Common Commands
, 2-2, 2-9
IEEE 488.2 Standard
, 5-5
IEEE488.1
obtaining copy of standard, 1-8
IEEE488.2
common commands, 2-9
conformance
, 2-8, 2-9, 4-43
obtaining copy of standard
, 1-9
Illegal parameter value
, 5-9
Init ignored
, 5-9