Instruction manual

Chapter 1 Before You Start...
Related Documentation
Programming Guide 1-9
1
To obtain a copy of this standard, write to:
Institute of Electrical and Electronic Engineers Inc.
345 East 47th Street
New York, NY 10017 USA
6. The International Institute of Electrical Engineers and Electronic
Engineers, IEEE Standard 488.2-1987, IEEE Standard Codes,
Formats, Protocols, and Common Commands for Use with ANSI/IEEE
Std 488.1-1987 Programmable Instrumentation.
This standard defines the underlying message formats and data types
used in SCPI. It is intended more for firmware engineers than for
instrument users/programmers. However, it can be useful if you need
to know the precise definition of specific message formats, data types,
or common commands.
To obtain a copy of this standard, write to:
The Institute of Electrical and Electronic Engineers Inc.
345 East 47th Street
New York, NY 10017 USA
7. Hewlett-Packard Company, BASIC 5.0/5.1 Interfacing Techniques
Vol 2., Specific Interfaces, 1987.
This BASIC manual contains a good non-technical description of the
GPIB (IEEE 488.1) interface in Chapter 12, “The GPIB Interface.”
Subsequent revisions of BASIC may use a slightly different title for
this manual or chapter. This manual is the best reference on I/O for
BASIC programmers.
To obtain a copy of this manual, contact your nearest Agilent
Technologies Sales office.
8. Hewlett-Packard Company, Tutorial Description of the Hewlett-
Packard Interface Bus, 1987.
To obtain a copy of this manual, contact your nearest Agilent
Technologies Sales office.