Instruction manual

Chapter 4 Command Reference
Common Commands
4-52 Programming Guide
4
*SAV (Save Command)
COMMAND *SAV <NRf> | <non-decimal numeric>
This command stores the current state of the instrument in register 0 of
local non-volatile memory when *RCL or is executed or Recall is selected
from the menu using the front-panel controls.
<NRF> RANGE 1 to 8
<NRF> RESOLUTION 1
COMMENTS • The following states are saved:
:DISPlay[:WINDow]:BACKground:[:STATe]
:INITiate:CONTinous
[:SENSe]:AVERage[:STATe]
[:SENSe]:AVERage:COUNt
[:SENSe]:CORRection:CSET:SELect
[:SENSe]:CORRection:CSET:STATe
[:SENSe]:FILTer:FM:AUTO
[:SENSe]:FREQuency:OFFset:STATe
[:SENSe]:FREQuency:RESolution
[:SENSe]:FREQuency:TRACking
[:SENSe]:FUNCtion[:ON]
[:SENSe]:POWer:AC:REFerence
[:SENSe]:POWer:AC:REFerence:STATe
[:SENSe]:ROSCillator:SOURce
:TRIGger:[:SEQuence]:HOLDoff
*DDT
• The following front-panel settings are saved (these settings have no
command equivalents):
Rel Pwr (Relative Power) value Rel Freq (Relative Frequency) value
Rel Pwr (Relative Power) state Rel Freq (Relative Frequency) state
Power Display Units
RELATED
FRONT-PANEL
KEYS
Shift + Menu (SAVE > 0 through 8)