Instruction manual

Chapter 4 Command Reference

Common Commands

Programming Guide 4-51

*RST (Reset Command)

COMMAND *RST

This event command performs an instrument reset.

The reset performs the following:

• sets instrument settings to their *RST states, and

• places the instrument in “Operation Complete Idle State” and

“Operation Complete Query Idle State.”

COMMENTS • See the section titled “*RST Response” on Page 2-19 for a complete

listing of the *RST state.

• Each command description in this chapter includes the *RST state in

the “Comment” portion of the definition.

FRONT-PANEL

KEYS

Reset/Local