Instruction manual

Chapter 4 Command Reference

[:SENSe]:FUNCtion Subtree

Programming Guide 4-27

[:SENSe]:FUNCtion Subtree

This subtree controls the sensor functions.

COMMAND [:SENSe]:FUNCtion[:OFF] . . . <sensor_function>[,<sensor_function>]

Sets or queries the sensor functions to be sensed by the Counter.

The <sensor_function> strings are:

"[XNONe:]FREQuency [1 | 2]"

"[XNONe:]POWer [2]"

QUERY RESPONSE • The query form of this command returns a comma-separated list of

functions that are OFF.

• The string omits default nodes (XNONe) and uses short-form mnemonics.

If the channel specifier(s) are set to default value(s), no channel

specifier is returned in response. If the channel specifier(s) are not set

to default value(s), they are returned in the response with a single

space separating the first channel specifier from the function name.

For example:

– “FREQ” is returned for frequency on Channel 1.

– “FREQ 2” is returned for frequency on Channel 2.

COMMENTS • *RST: “FREQ 2”

• This command can be used to turn individual function(s) OFF without

affecting other functions.

• If the optional channel specification is omitted from the

<sensor_function>, a default channel selection is made. For Frequency

and Power, the default is Channel 2.

FRONT-PANEL

KEYS

Various