User`s guide

19
Command Description
RM Set measurement range
RV Read service request mask
SM Status message
SPD 20 | 40
2
ST Store (save) power meter configuration
SYST:LANG SCPI
3
Selects SCPI language
TR0 Trigger hold
TR1 Trigger immediate
TR2 Trigger with delay
TR3 Trigger free run
ZE Zero
@1 Prefix for status mask
?ID Identification query
1. This command is accepted but has no active function.
2. This command is not an original 438A command. However, it can be used to
set the measurement speed to 20 or 40 readings/sec in 438A mode.
3. This command is not an original 438A command. However, it can be used
to terminate the 438A language and select the SCPI language. Note that it
is recommended that the instrument is preset following a language switch.