User`s guide

8-7
Programmer’s Quick Reference
Commands and Queries
:FUNCtion:RANGe <range> :FUNCtion:RANGe? <range> ::= the full-scale vertical axis value in NR3 format.
The range for ADD, SUBT, MULT is 8E-6 to 800E+3.
The range for the INTegrate function is 8E-9 to 400E+3.
The range for the DIFFerentiate function is 80E-3 to 8.0E12
(depends on current sweep speed).
The range for the FFT function is 8 to 800 dBV.
:FUNCtion:REFerence <level> :FUNCtion:REFerence? <level> ::= the current reference level in NR3 format.
The range of legal values is from 400.0 dBV to +400.0 dBV
(depending on current range value).
:FUNCtion:SCALe <scale
value>[<suffix>]
:FUNCtion:SCALe <scale value> ::= integer in NR1 format
<suffix> ::= {V | dB}
:FUNCtion:SOURce <source> :FUNCtion:SOURce? <source> ::= {CHANnel<n> | ADD | SUBT | MULT}
<n> ::= 1-2 or 1-4 in NR1 format
:FUNCtion:SPAN <span> :FUNCtion:SPAN? <span> ::= the current frequency span in NR3 format.
Legal values are 1 Hz to 100 GHz
:FUNCtion:WINDow <window> :FUNCtion:WINDow? <window> ::= {RECTangular | HANNing | FLATtop}
n/a *GMC? <macro label> <macro label> ::= quoted ASCII string, block data in IEEE 488.2 #
format
:HARDcopy:DESTination
<destination>
:HARDcopy:DESTination <destination> ::= {CENTronics | FLOPpy}
:HARDcopy:FACTors
{{0 | OFF} | {1 | ON}}
:HARDcopy:FACTors? {0 | 1}
:HARDcopy:FFEed {{0 | OFF} | {1 |
ON}}
:HARDcopy:FFEed? {0 | 1}
:HARDcopy:FORMat <device> :HARDcopy:FORMat? <format> ::= {TIFF | BMP | CSV | LASerjet | DESKjet | EPSon |
SEIKo}
:HARDcopy:GRAYscale
{{0 | OFF} | {1 | ON}}
:HARDcopy:GRAYscale? {0 | 1}
n/a *IDN? AGILENT TECHNOLOGIES,<model>, <serial number>,X.XX.XX
<model> ::= the model number of the instrument
<serial number> ::= the serial number of the instrument
<X.XX.XX> ::= the software revision of the instrument
n/a *LMC? <ascii string> ::= string list seperated by commas
n/a *LRN? <learn_string> ::= current instrument setup as a block of data in
IEEE 488.2 # format
:MARKer:MODE<mode> :MARKer:MODE? <mode> ::= {OFF | MEASure | MANual}
:MARKer:X1Position
<position> [suffix]
:MARKer:X1Position? <position> ::= X1 cursor position value in NR3 format
[suffix] ::= {s | ms | ms | ns | ps | Hz | kHz | MHz}
<return_value> ::= X1 cursor positon value in NR3 format
:MARKer:X1Y1source <source> :MARKer:X1Y1 <source> <source> ::= {CHANnel<n> | FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= <source>
:MARKer:X2Position
<position> [suffix]
:MARKer:X2Position? <position> ::= X2 cursor position value in NR3 format
[suffix] ::= {s | ms | ms | ns | ps | Hz | kHz | MHz}
<return_value> ::= X2 cursor positon value in NR3 format
:MARKer:X2Y2source <source> :MARKer:X2Y2 <source> <source> ::= {CHANnel<n> | FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= <source>
Command Query Options and Query Returns