User`s guide

8-6
Programmer’s Quick Reference
Commands and Queries
:DISPlay:DATA [format][,][area]
<display data>
:DISPlay:DATA? [format][,][area] <format> ::= {TIFF} (command only)
<area> ::= {GRATicule} (command only)
<format> ::= {TIFF | BMP} (query only)
<area> ::= {GRATicule | SCReen} (query only)
<display data> ::= data in IEEE 488.2 # format
:DISPlay:LABel {{0 | OFF} | {1 | ON}} :DISPlay:LABel? {0 | 1}
:DISPlay:LABList #80000524
<binary block>
:DISPlay:LABList? <binary block> ::= a time-ordered list of 75 labels. Each label can
be a maximum of 6 characters followed by a comma.
:DISPlay:PERSistence <value> :DISPlay:PERSistence? <value> ::= {MINimum | INFinite}}
:DISPlay:SOURce <value> :DISPlay:SOURce? <value> ::= {PMEMory{0 | 1 | 2}}
:DISPlay:VECTors {{1 | ON} | {0 | OFF}} :DISPlay:VECTors? {1 | 0}
*DMC <macro label>,<macro
definition>
n/a <macro label> ::= quoted ASCII string
<macro definition> ::= block data in IEEE 488.2 # format
*EMC {{0 | OFF} | {1 | ON}} *EMC? {0 | 1}
*ESE <mask> *ESE? <mask> ::= 0 to 255; an integer in NR1 format
Bit Weight Enables
7 128 PON - Power On
6 64 URQ - User Request
5 32 CME - Command Error
4 16 EXE - Execution Error
3 8 DDE - Device Dependent Error
2 4 QYE - Query Error
1 2 TRG - Trigger Query
0 1 OPC - Operation Complete
:EXTernal:BWLimit <bwlimit> :EXTernal:BWLimit? <bwlimit> ::= {0 | OFF}
:EXTernal:IMPedance <value> :EXTernal:IMPedance? <impedence> ::= {ONEMeg} for 54620-series
<impedence> ::= {ONEMeg | FIFTy} for 54640-series
:EXTernal:PROBe <attenuation> :EXTernal:PROBe? <attenuation> ::= probe attenuation ratio in NR3 format
:EXTernal:PROTection[:CLEAR] :EXTernal:PROTection? {NORM | TRIP}
:EXTernal:RANGe
<range>[<suffix>]
:EXTernal:RANGe? <range> ::= vertical full-scale range value in NR3 format
<suffix> ::= {V | mV}
:EXTernal:UNITs <units> :EXTernal:UNITs? <units> ::= {VOLTs | AMPeres}
n/a *ESR? <status> ::= 0 to 255; an integer in NR1 format
:FUNCtion:CENTer <frequency> :FUNCtion:CENTer? <frequency> ::= the current center frequency in NR3 format.
The range of legal values is from 0 Hz to 25.00 GHz.
:FUNCtion:DISPlay {{0 | OFF} | {1 |
ON}}
:FUNCtion:DISPlay? {0 | 1}
:FUNCtion:OFFSet <offset> :FUNCtion:OFFSet? <offset> ::= the value at center screen in NR3 format.
The range of legal values is +/-10 times the current sensitivity of
the selected function.
:FUNCtion:OPERation <operation> :FUNCtion:OPERation? <operation> ::= {SUBTract | MULTiply | INTegrate | DIFFerentiate
| FFT}
Command Query Options and Query Returns