User`s guide

7-3

Installing and Using the Programmer’s Reference

To install the help file under Microsoft Windows

The Programmer’s Reference help file requires Microsoft Windows 95/98/NT or

greater running on an IBM-compatible PC. The file uses the Microsoft Windows

help viewer, WINHELP.EXE.

1 Insert the “Programmer’s Reference” floppy disk into the floppy disk

drive of your PC.

2Select

Start | Run from the Windows taskbar, then type in the

following:

<drive>:\setup.exe

where <drive> is your floppy disk drive letter.

3 Follow the instructions on screen to complete the installation.

The installer copies the help file to a directory named:

C:\Program Files\Agilent 54620_40-Series Programmer’s Reference

You can choose a different directory if desired. It also creates a Start Program

group that you can use to open the help file with the Microsoft Windows help

viewer.