User`s guide

8-15
Programmer’s Quick Reference
Commands and Queries
:TRIGger:GLITch:RANGe
<greater than time> [suffix],
<less than time> [suffix]
:TRIGger:GLITch:RANGe? <greater than time> ::= start time from 10 ns to 9.99 seconds in
NR3 format
<less than time> ::= stop time from 15 ns to 10 seconds in NR3
format
[suffix] ::= {s | ms | us | ns | ps}
:TRIGger:GLITch:SOURce <source> :TRIGger:GLITch:SOURce? <source> ::= {CHANnel<n> | EXTernal} for 546xxA;
<source> ::= {CHANnel<n> | DIGital0,...,DIGital15 } for 546xxD
<n> ::= 1-2 or 1-4 in NR1 format
:TRIGger:HFReject {{0 | OFF} | {1 |
ON}}
:TRIGger:HFReject? {0 | 1}
:TRIGger:HOLDoff <holdoff_time> :TRIGger:HOLDoff? <holdoff_time> ::= 60 ns to 10 s in NR3 format
:TRIGger:IIC:PATTern:ADDRess
<value>
:TRIGger:IIC:PATTern:ADDRess? <value> ::= integer or <string>
<string> ::= ""0xnn"" n ::= {0 ,...., 9 | A ,...., F}
:TRIGger:IIC:PATTern:DATA
<value>
:TRIGger:IIC:PATTern:DATA? <value> ::= integer or <string>
<string> ::= ""0xnn"" n ::= {0 ,...., 9 | A ,...., F}
:TRIGger:IIC:[SOURce:]CLOCk
<source>
:TRIGger:IIC:[SOURce:]CLOCk? <source> ::= {CHANnel<n> | EXTernal} for 546xxA
<source> ::= {CHANnel<n> | DIGital0,...,DIGital15 } for 546xxD
<n> ::= 1-2 or 1-4 in NR1 format
:TRIGger:IIC:[SOURce:]DATA
<source>
:TRIGger:IIC:[SOURce:]DATA? <source> ::= {CHANnel<n> | EXTernal} for 546xxA
<source> ::= {CHANnel<n> | DIGital0,...,DIGital15 } for 546xxD
<n> ::= 1-2 or 1-4 in NR1 format
:TRIGger:IIC:TRIGger:QUALifier
<value>
:TRIGger:IIC:TRIGger:QUALifer? <value> ::={EQUal | NOTequal | LESSthan | GREaterthan}
:TRIGger:IIC:TRIGger[:TYPE]
<type>
:TRIGger:IIC:TRIGger[:TYPE]? <type> ::= {STARt | STOP | READ7 | READEeprom | WRITe7 |
WRITe10 | NACK | RESTart}
:TRIGger:LIN:SIGNal:BAUDrate
<baudrate>
:TRIGger:LIN:SIGNal:BAUDrate? <baudrate> ::= {2400 | 9600 | 19200}
:TRIGger:LIN:SIGNal:DEFinition
<value>
:TRIGger:LIN:SIGNal:DEFinition? <value> ::= {LIN | RX | TX}
:TRIGger:LIN:SOURce <source> :TRIGger:LIN:SOURce? <source> ::= {CHANnel<n> | EXTernal} for 546xxA
<source> ::= {CHANnel<n> | DIGital0,...,DIGital15} for 546xxD
<n> ::= 1-2 or 1-4 in NR1 format
:TRIGger:LIN:TRIGger <condition> :TRIGger:LIN:TRIGger? <condition> ::= {SYNCbreak}
:TRIGger:MODE <mode> :TRIGger:MODE? <mode> ::= {EDGE | GLITch | PATTern | CAN | DURation | IIC |
SEQuence | SPI | TV | USB}
<return_value> ::= {<mode> | <none>}
<none> ::= query returns “NONE” if the :TIMebase:MODE is ROLL
or XY
:TRIGger:NREJect {{0 | OFF} | {1 |
ON}}
:TRIGger:NREJect? {0 | 1}
:TRIGger:PATTern <value>,
<mask> [,<edge source>, <edge>]
:TRIGger:PATTern? <value> ::= 32-bit integer or <string>
<mask> ::= 32-bit integer or <string>
<string> ::= "0xnnnnnn"; n ::= {0,...,9 | A,...,F}
<edge source> ::= {DIGital0,..,DIGital15 | CHANnel<n> | NONE}
<edge> ::= {POSitive | NEGative}
<n> ::= 1-2 or 1-4 in NR1 format
:TRIGger:SEQuence:COUNt
<count>
:TRIGger:SEQuence:COUNt? <count> ::= integer in NR1 format
Command Query Options and Query Returns