Specifications
99
Chapter 3: Testing Performance
To Test the Time Interval Accuracy
3 Set up the function generator according to the following table.
Function Generator Setup
Set up the logic analyzer
1 Set up the Sampling tab.
a In the Analyzer setup window, select the Sampling tab.
b Select Timing Mode.
c In Timing Mode Controls, select Trigger Position. Then select Start.
d Select the Acquisition Depth field. Then select “512K”.
e Select the sample period field. Then enter 2.5 ns.
)UHT0+] $PSWG9 0RGXODWLRQ2II