Specifications

6
Contents
To Test the Single-clock, Single-edge, State Acquisition 48
Set up the equipment 48
Set up the logic analyzer 48
Connect the logic analyzer 53
Verify the test signal 56
Check the setup/hold combination 58
To Test the Multiple-clock, Multiple-edge, State Acquisition 66
Set up the equipment 66
Set up the logic analyzer 67
Connect the logic analyzer 71
Verify the test signal 74
Check the setup/hold with single clock edges, multiple clocks 76
To Test the Single-clock, Multiple-edge, State Acquisition 83
Set up the equipment 83
Set up the logic analyzer 84
Connect the logic analyzer 88
Verify the test signal 91
Check the setup/hold with single clock, multiple clock edges 93
To Test the Time Interval Accuracy 98
Set up the equipment 98
Set up the logic analyzer 99
Connect the logic analyzer 102
Acquire the data 102
To Test the Multi-Card Module 105
Set up the equipment 105
Set up the logic analyzer 106
Connect the logic analyzer 110
Verify the test signal 113
Check the setup/hold combination 115
Performance Test Record 121
4Calibrating
Calibration Strategy 126