Specifications

17
Chapter 2: Preparing for Use
mechanical defects. If you find any defects, contact your nearest Agilent
Technologies Sales Office. Arrangements for repair or replacement are made, at
Agilent Technologies’ option, without waiting for a claim settlement.
To prepare the mainframe
CAUTION: Turn off the mainframe power before removing, replacing, or installing the module.
CAUTION: Electrostatic discharge can damage electronic components. Use grounded wrist-straps
and mats when performing any service to this module.
1 Remove power from the instrument.
a Exit all logic analysis sessions. In the session manager, select
Shutdown.
b At the query, select Power Down.
c When the “OK to power down” message appears, turn the instrument
off.
d Disconnect the power cord.
e Disconnect any input or output connections.
2 Plan your module configuration.
If you are installing a one-card module, use any available slot in the mainframe.
If you are installing a multi-card module, use adjacent slots in the mainframe.
3 Loosen the thumb screws.
Cards or filler panels below the slots intended for installation do not have to be
removed.
Starting from the top, loosen the thumb screws on filler panels and cards that
need to be moved.