Specifications

145
Chapter 6: Replacing Assemblies
ordering information.
5 Install the screws connecting the probe cable to the rear panel of the
module.
CAUTION: If you over tighten the screws, the threaded inserts on the back panel might break off of
the back panel. Tighten the screws only enough to hold the cable in place.
To return assemblies
Before shipping the module to Agilent Technologies, contact your nearest Agilent
Technologies Sales Office for additional details. In the U.S., call 1-800-403-0801.
1 Write the following information on a tag and attach it to the module.
• Name and address of owner
• Model number
• Serial number
• Description of service required or failure indications
2 Remove accessories from the module.
Only return accessories to Agilent Technologies if they are associated with the
failure symptoms.
3 Package the module.