Specifications

119
Chapter 3: Testing Performance
To Test the Multi-Card Module
b In the Marker Setup window, select the Define... field associated with
G1, and the G1 Marker Pattern window appears. In the pattern field,
enter
“A” (2-card module)
“2A” (3-card module) or
“AA” (4- or 5-card module).
Select Apply, then select Close.
If the label selection field reads Label1_TZ, you must select Label1 for the search
term. To do this, select Label1_TZ; then, in the popup menu, select Replace label. In
the Replace popup menu, select Label1, then Apply, then Close.
c In the Marker Setup window, select the Define... field associated with
G2, and the G2 Marker Pattern window appears. In the pattern field,
enter
“5” (2-card module)
“15” (3-card module) or
“55” (4- or 5-card module).
Select Apply, then select Close.
If the Label selection field reads Label1_TZ, you must select Label1 for the search
term. Follow the same procedure as in b above.
d In the Marker Setup window, select the ‘occurs’ value field that
corresponds to marker G1. Enter 4095.