Service manual

86 3
Adjustment
Running the Adjustment Program
Running the Adjustment Program
1. Start the HP VEE.
2. Load the adjustment program file into the HP VEE as follows.
a. Pull down the File menu from the HP VEE window and select Open.
b. Select the file C:\ADJ4294A\ADJ4294A.VEE and click Open.
3. You may be asked to add drivers for the equipment during the program loading. Click
OK and enter the GPIB address for each equipment. Enter 0 as the address for the
equipment which are not used for the adjustment. (Refer to
Table 3-1)
Table 3-1 Device Name and GPIB Address Example
Device Name Equipment GPIB Address
4294A 4294A 717
P_Meter Power Meter 713
F_Counter Frequency Counter 703
3458A Multimeter 722
4. Click START button on the HP VEE Screen.
5. Follow the instruction shown on the display.