Instruction manual

Appendix D 453
Initial Settings
Initial Settings, Settings that can be Saved/Recalled, Settings that can be
Backed Up
D. Initial Settings
Printer Color Black and White No effect ¬Ö
Resolution 75 DPI No effect ¬Ö
Top margin 1 inch No effect ¬Ö
Left margin 1 inch No effect ¬Ö
Landscape printing Off No effect ¬Ö
Formfeed On No effect ¬Ö
Softkey label printing Off No effect ¬Ö
Time stamp Off No effect ¬Ö
Table format when list sweep table is printed Start value /
Stop value
No effect ¬Ö
Table format when limit line table is printed Upper limit value /
Lower limit value
No effect ¬Ö
Beep On/Off setting of the beep to notify the completion of
operation
On No effect ¬Ö
On/Off setting of the beep when the limit test result is
FAIL
Off ¬¬ Ö
On/Off setting of the beep when an error occurred or
when an invalid key is pressed
Off No effect ¬Ö
Others Date display format of internal clock MM/DD/YY No effect ¬Ö
Front panel key and rotary knob lock
(GPIB command only)
Off No effect ¬
IBASIC mass storage device selection Floppy Disk Drive No effect ¬Ö
Data transfer format (GPIB command only) ASCII ¬¬ Ö
Table D-1 Initial settings, settings that can be saved/recalled, settings that can be backed up
Function Setting
Initial settings
(factory settings)
[Preset] *RST
Save/
Recall
Backup