Instruction manual

Appendix B 377
Key Definitions
Softkeys displayed by pressing the [Bw/Avg] key
B. Key Definitions
3
|
Selects 3 as the measurement bandwidth (during list sweep segment edit, sets the
measurement bandwidth of the segment to 3).
BWFACT 3
4
|
Selects 4 as the measurement bandwidth (during list sweep segment edit, sets the
measurement bandwidth of the segment to 4).
BWFACT 4
5 PRECISE Selects 5 as the measurement bandwidth (during list sweep segment edit, sets the
measurement bandwidth of the segment to 5). The measurement accuracy is
highest.
BWFACT 5
return Returns to the higher-level menu (Table B-32, “Measurement
bandwidth/averaging (Bw/Average) menu,” on page 376, or Table B-50,
“Segment edit (Edit Segment) menu (3/3),” on page 386).
(N/A)
Table B-33 Measurement bandwidth (Bandwidth) configuration menu
Key operation: [Bw/Avg] - BAND WIDTH [ ]
[Sweep] - EDIT LIST - EDIT/ADD - more 1/3 - more 2/3 - BAND WIDTH [ ]
Softkey Function GPIB command