Specifications

74 Chapter 6

Retrieving Measurement Results

Data Transfer Format

When you transfer data with the following commands, you can select either the ASCII

format or binary format.

NOTE When you transfer data with commands other than the following, you cannot select the

data transfer format because it is fixed as the ASCII format.

• :FETC? on page 280

• :READ? on page 293

• *TRG on page 208

• Commands that begin with :DATA

To set the data transfer format, use the following commands:

• :FORM on page 282

NOTE Executing the :SYST:PRES on page 306 does not affect the setting of the data transfer

format.

:DATA:CAD{1-8}? on page 259 :DATA:CCO{1-6} on page 260

:DATA:CMD{1-2}? on page 261 :DATA:CMP{1-3} on page 262

:DATA:RCAD{1-3}? on page 265 :DATA:RCCO{1-3} on page 265

:DATA:RCMD{1-2}? on page 266 :DATA:RCMP{1-3} on page 266

:DATA:FDAT{1-4}? on page 263 :DATA:RAW? on page 264

:DATA:IMON? on page 263 :DATA:VMON? on page 267

:DATA:RDC? on page 267