Specifications

364 Appendix G
Initial Settings
Initial Settings, Settings that can be Saved/Recalled, Settings that can be
Backed Up
Setting items
Initial settings
(factory settings)
Reset
Save/
Recall
Backup
Available
method
to set
:SYST:PRES *RST
Data
transfer
format
Data transfer format (ASCII/Binary) ASCII No effect ASCII ´´GPIB
Byte order when data transfer format is set to binary
(normal/swapped)
Normal No effect Normal ´´GPIB
Printer Printer selection HP DeskJet 970C
Series
No effect ¬´m Both
Content Screen graphics ¬¬m ´ Both
Color Normal ¬¬m ´ Both
Orientation Portrait ¬¬m ´ Front
Key lock Front panel Off ¬¬´´Both
Keyboard Off No effect ¬´´Both
Mouse Off ¬¬´´Both
Beeper On/Off of beep to notify the completion of operation On ¬¬m ´ Both
Beep to notify an error/warning
or sorting results
On/Off On ¬¬m ´ Both
Mode FAIL ¬¬m ´ Both
Time and date of the internal clock ——— No effect ¬´m Both
GPIB address 17 No effect ¬´m Front
IP address 192.168.0.1 No effect ¬´m Front
Gateway IP address 127.0.0.1 No effect ¬´m Front
Subnet mask 255.255.255.0 No effect ¬´m Front
Computer name 4287A No effect ¬´m Front
Enable/Disable setting of network device Disable No effect ¬´m Front
Service request enable register value 0 No effect ¬´´GPIB
Standard event status enable register value 0 No effect ¬´´GPIB
Operation status
register
Enable register value 0 No effect ¬´´GPIB
Positive transition filter value 32767 No effect ¬´´GPIB
Negative transition filter value 0 No effect ¬´´GPIB
Questionable status enable register value 0 No effect ¬´´GPIB