Specifications

Appendix G 361
Initial Settings
Initial Settings, Settings that can be Saved/Recalled, Settings that can be
Backed Up
1. Chapter Title
2. Chapter Title
4. Chapter Title
5. Chapter Title
G. Initial Settings
Setting items
Initial settings
(factory settings)
Reset
Save/
Recall
Backup
Available
method
to set
:SYST:PRES *RST
Calibration option of ‘Calibration Wizard’
(calibration only /calibration and compensation)
Calibration and
Compensation
No effect ¬´m Front
Setting of
‘Calibration
Wizard’
Calibration Low-Loss C Check No effect ¬´m Front
DC Open No check No effect ¬´m Front
DC Short No check No effect ¬´m Front
DC Load No check No effect ¬´m Front
Compensation Open Check No effect ¬´m Front
Short Check No effect ¬´m Front
DC Open No check No effect ¬´m Front
DC Short No check No effect ¬´m Front
Target table on measurement of data
(All tables/Active table only)
Active table only No effect ¬´m Front
Automatically saves the state into auto-recall file
(autorec.sta) when the ‘Calibration Wizard’ is
completed
No check No effect ¬´m Front
R
dc
check at
measurement
of each
standard
On/Off Off (No check) No effect ¬´m Front
Limit Calibration Short-Load 25 [W]No effect¬´m Front
Load-Open 100 [W]No effect¬´m Front
Compensat
ion
Short-Open
50 [W]No effect¬´m Front