Specifications

358 Appendix G
Initial Settings
Initial Settings, Settings that can be Saved/Recalled, Settings that can be
Backed Up
Initial Settings, Settings that can be Saved/Recalled, Settings
that can be Backed Up
The following table shows the following items.
• Initial settings (factory settings)
• Settings reset from the GPIB by the :SYST:PRES command on page 306 or the keys
on the front panel
• Settings reset from the GPIB by the *RST command on page 206
• Settings that can be saved/recalled
The table uses the following symbols.
m : Settings that can be saved/recalled
´ : Settings that cannot be saved/recalled
• Settings that can be backed up
The table uses the following symbols.
m : Settings that can be backed up
´ : Settings that cannot be backed up
• Available method to set a setting
The table uses the following symbols.
GPIB : Settings that can be set by remote controller using a GPIB command.
Front : Settings that can be set by the front panel keys, the keyboard or the mouse.
Both : Settings that can be set by either of the above methods.
NOTE The symbol “¬” in the table indicates that the value is the same as that indicated to the
left.