Specifications

352 Appendix E
4286A vs. 4287A GPIB Commands Correspondence Table
4286A vs. 4287A GPIB Commands Correspondence Table
Save/Recall Save/Recall :MMEM:STOR:CAL:AUTO
:MMEM:STOR:DINT:GRAP
:MMEM:STOR:DINT:TRAC
:MMEM:STOR:ITEM:TRAC:CAT?
:MMEM:STOR:ITEM:TRAC:DEL
:MMEM:STOR:ITEM:TRAC:SEL
:MMEM:STOR:STAT
:MMEM:STOR:TRAC
:MMEM:LOAD:STAT
:MMEM:LOAD:CAL
:MMEM:LOAD:TRAC
(Because these differ in how they are
used, there is no one-to-one
correspondence between the two
machines’ commands.)
:MMEM:STOR on page 291
:MMEM:LOAD on page 290
File
Management
Copy :MMEM:COPY ¬on page 289
Delete :MMEM:DEL ¬on page 290
Delete
CALREC_C
:MMEM:DEL:CAL None.
Creat a new
directory
:MMEM:CRE:DIR ¬on page 289
Change current
directory
:MMEM:CDIR None.
Change file
extension
:MMEM:FNAM:EXT{1-2} None.
Initialize a strage
device
:MMEM:INIT None.
Read the
information about
a storage device
None. :MMEM:CAT? on page 288
File Management :MMEM:CDIR
:MMEM:COPY
:MMEM:CRE:DIR
:MMEM:DEL
:MMEM:DEL:CAL
:MMEM:FNAM:EXT{1-2}
:MMEM:INIT
None.
(Cannot be performed with a GPIB
command; do this by manually operating
the front panel.)
Printer Items Related to Printer or Plotter
Settings
:HCOP:DEF
:HCOP:DEV:LANG
:HCOP:DEV:SPE
:HCOP:ITEM:ANN:STAT
:HCOP:ITEM:MENU:STAT
:HCOP:ITEM:TDST:STAT
:HCOP:PAGE:DIM:FULL
:HCOP:PAGE:DIM:QUAD{1-4}
:HCOP:PAGE:SCAL
(Because these differ in how they are
used, there is no one-to-one
correspondence between the two
machines’ commands.)
:HCOP:DPR on page 285
:HCOP:PRIN? on page 286
:HCOP:CONT on page 284
:HCOP:IMAG on page 286
Output Run :HCOP ¬on page 284
Stop :HCOP:ABOR ¬on page 284
Function Item to set/run
GPIB command
4286A 4287A