Specifications

348 Appendix E
4286A vs. 4287A GPIB Commands Correspondence Table
4286A vs. 4287A GPIB Commands Correspondence Table
Comparator
(BIN Sort)
ON/OFF Setting :CALC:COMP:STAT :CALC:COMP on page 211
Read Results of Decision :DATA? BIN :CALC:COMP:DATA:BIN? on
page 221
Set Beep Output Mode :CALC:BEEP:COND :CALC:COMP:BEEP:COND on
page 211
BIN Setting :CALC:COMP:CLE
:CALC:COMP:OFFS
:CALC:COMP:SAVE
:CALC:COMP:SEGM
:CALC:COMP:SEGM:ADD
:CALC:COMP:SEGM:DEL
:CALC:COMP:SEGM:EDIT
:CALC:COMP:SEGM:SAVE
:CALC:COMP:SEGM:UPP
:CALC:COMP:SEGM:LOW
:CALC:COMP:CONT:SEGM
:CALC:COMP:SREJ:STAT
:CALC:COMP:SREJ:UPP
:CALC:COMP:SREJ:LOW
(Because these differ in how they are
used, there is no one-to-one
correspondence between the two
machines’ commands.)
:CALC:COMP:CLE on page 214
:CALC:COMP:COND{1-4}:SNUM
on page 218
:CALC:COMP:COND{1-4}:PAR on
page 217
:CALC:COMP:COND{1-4}:MODE
on page 215
:CALC:COMP:COND{1-4}:NOM on
page 216
:CALC:COMP:BIN{1-13} on page 212
:CALC:COMP:BIN{1-13}:COND{1-4
}:LIM on page 213
:CALC:COMP:BIN{1-13}:COND{1-4
}:LTYP on page 214
:CALC:COMP:OGB on page 223
BIN Counter ON/OFF
Setting
:CALC:COMP:COUN ¬on page 219
Count
Val ue
Clear :CALC:COMP:COUN:CLE ¬on page 219
Read :DATA? BCOU :CALC:COMP:DATA:BCOU? on
page 220
R
dc
Measurement
Result
Comparator
ON/OFF
Setting
:CALC:RDC:LIM:STAT None.
(This is done by turning ON/OFF the
entire function of the comparator.)
Set Limit Value :CALC:RDC:LIM:UPP
:CALC:RDC:LIM:LOW
:CALC:COMP:RDC:LIM on page 224
Read Results of
Decision
:DATA? RDCL :CALC:COMP:DATA:RDC? on
page 222
Limit Test :CALC:LIM:STAT
:CALC:LIM:CLE
:CALC:LIM:SAVE
:CALC:LIM:SEGM
:CALC:LIM:SEGM:ADD
:CALC:LIM:SEGM:DEL
:CALC:LIM:SEGM:EDIT
:CALC:LIM:SEGM:SAVE
:CALC:LIM:SEGM:UPP
:CALC:LIM:SEGM:LOW
:CALC:LIM:SEGM:CONT
None.
(The comparator function is used
instead.)
Function Item to set/run
GPIB command
4286A 4287A