Specifications

342 Appendix D
GPIB Command Tree
Command Tree
SOURce
:LIST
<numeric>,..,<numeric> (Nop
*1
´3+1 parameters)
:CLEar [No query]
:POINt <numeric>
:RDC {ON|OFF|1|0}
:OFSCancel {ON|OFF|1|0}
:SIZE? [Query only]
:STATe {ON|OFF|1|0}
:TABLe <numeric>
:UNIT {DBM|V|A}
STATus
:OPERation
:CONDition? [Query only]
:ENABle <numeric>
:NTRansition <numeric>
:PTRansition <numeric>
[:EVENt]? [Query only]
:PRESet [No query]
:QUEStionable
:ENABle <numeric>
[:EVENt]? [Query only]
SYSTem
:BEEPer1
[:IMMediate] [No query]
:STATe {ON|OFF|1|0}
:BEEPer2
[:IMMediate] [No query]
:STATe {ON|OFF|1|0}
:DATE <numeric>,<numeric>,<numeric>
:ERRor? [Query only]
:ERRor
:COUNt? [Query only]
:EXTRef? [Query only]
:KLOCk
[:FRONt] {ON|OFF|1|0}
:KBD {ON|OFF|1|0}
:MOUSe {ON|OFF|1|0}
:POFF [No query]
:PRESet [No query]
:CONFirm {ON|OFF|1|0}
:TIME <numeric>,<numeric>,<numeric>
:VERSion? [Query only]
TRIGger
[:SEQuence1]
:DELay <numeric>[MS|M|S]
[:IMMediate] [No query]
:SOURce {INTernal|MANual|EXTernal|BUS}
:SEQuence2
:DELay <numeric>[MS|M|S]
:SLOPe {POSitive|NEGative}
*1. Nop: The number of measurement points defined in the active table.
Command Parameter Note