Specifications

328 Appendix C
GPIB Command Table
GPIB Command Table
GPIB Command Table
The following table lists the 4287A GPIB commands sorted according to function. See
Chapter 16, “Command Reference,” on page 201 for detailed information on the 4287A
GPIB commands.
Function Setting/Operation GPIB Command
Measurement
Condition
Reset Turns off the continuous activation
of the trigger system.
*RST (page 206)
Turns on the continuous activation
of the trigger system.
:SYST:PRES (page 306)
Measurement parameter :CALC:PAR{1-4}:FORM (page 230)
List measurement On/Off :SOUR:LIST:STAT (page 297)
Measurement point for single-point
measurement
:SOUR:LIST:POIN (page 295)
Active table :SOUR:LIST:TABL (page 297)
Measurement
point setup table
(stimulus setup
table)
Clear :SOUR:LIST:CLE (page 295)
Unit of oscillator level :SOUR:UNIT (page 298)
Oscillator (frequency, level)
and averaging factor
:SOUR:LIST (page 294)
Averaging factor :AVER:COUN (page 210)
Reads the number of
measurement points
:SOUR:LIST:SIZE? (page 296)
R
dc
measurement On/Off :SOUR:LIST:RDC (page 296)
Offset cancel function On/Off :SOUR:LIST:RDC:OFSC (page 296)
Limit range :CALC:COMP:RDC:LIM (page 224)
Deviation
measurement
On/Off :CALC:PAR{1-4}:EXPR:STAT (page 229)
Mode :CALC:PAR{1-4}:EXPR:NAME (page 229)
Reference value :CALC:PAR{1-4}:EXPR:CENT (page 228)
Delay time Trigger delay :TRIG:DEL (page 308)
Measurement point delay :TRIG:SEQ2:DEL (page 309)