Specifications

314 Appendix A

Manual Changes

To adapt this manual to your Agilent 4287A, refer to Table A-1 and Table A-2.

Agilent Technologies uses a two-part, ten-character serial number that is stamped on the

serial number plate (Figure A-1). The first five characters are the serial prefix and the last

five digits are the suffix.

Execute the *IDN? command on page 205 to check the firmware version.

Figure A-1 Example of Serial Number Plate

Table A-1 Manual Changes by Serial Number

Serial Prefix or Number Make Manual Changes

Table A-2 Manual Changes by Firmware Version

Version Make Manual Changes

1.1x “Change 1” on page 315, “Change 2” on page 315

1.20 “Change 2” on page 315