Specifications

310 Chapter 16
Command Reference
:TRIG:SOUR
:TRIG:SOUR
Syntax :TRIGger[:SEQuence1]:SOURce {INTernal|MANual|EXTernal|BUS}
:TRIGger[:SEQuence1]:SOURce?
Description Lets you select one of the following four trigger sources:
Internal Configures the instrument to use its internal trigger source so that is it
automatically and continuously triggered.
Manual Configures the instrument to be triggered when you press the
[Trigger]
key on the front panel.
External Configures the instrument to be triggered when a trigger signal is input
through the Ext TRIGGER terminal or handler interface.
GPIB/LAN Configures the instrument to be triggered when the *TRG command
on page 208 is issued.
Parameters
Query Response {INT|MAN|EXT|BUS}<newline><^END>
Equivalent key
sequence
[Trigger Mode] - TRIG SOURCE - {INTERNAL|MANUAL|EXTERNAL|BUS}
Description
INTernal (initial value) Internal trigger source
MANual Manual trigger
EXTernal External trigger source
BUS GPIB/LAN trigger