Specifications

Chapter 16 303
Command Reference
:SYST:BEEP2:STAT
16. Command Reference
:SYST:BEEP2:STAT
Syntax :SYSTem:BEEPer2:STATe {ON|OFF|1|0}
Description Specifies whether to enable the beep mechanism used to notify the user of a warning
condition or a comparator result.
Parameters
Query response {1|0}<newline><^END>
See also :CALC:COMP:BEEP:COND on page 211
Equivalent key
sequence
[System] - BEEPER MENU - BEEP WARN
:SYST:DATE
Syntax :SYSTem:DATE <year>,<month>,<day>
:SYSTem:DATE?
Description Sets the date of the 4287A's internal clock.
Parameters
If your specified parameter is beyond the valid range, the command fails and an error is
generated.
Query response {year},{month},{day}<newline><^END>
See also :SYST:TIME on page 307
Equivalent key
sequence
[System] - SET DATE & TIME
Description
ON or 1 (initial value) Enables beep mechanism
OFF or 0 Disables beep mechanism
<year> <month> <day>
Description Year part of the
date
Month part of the
date
Day part of the date
Range 1980 to 2099 1 to 12 1 to 31
Resolution111