Specifications

Chapter 16 299
Command Reference
:STAT:OPER?
16. Command Reference
:STAT:OPER?
Syntax :STATus:OPERation[:EVENt]?
Description Returns the value of the Operation Status Event register. (Query only)
Query response {numeric}<newline><^END>
See also *CLS on page 204
Equivalent key
sequence
No equivalent keys are available on the front panel.
:STAT:OPER:COND?
Syntax :STATus:OPERation:CONDition?
Description Returns the value of the Operation Status Condition register. (Query only)
Query response {numeric}<newline><^END>
Equivalent key
sequence
No equivalent keys are available on the front panel.
:STAT:OPER:ENAB
Syntax :STATus:OPERation:ENABle <numeric>
:STATus:OPERation:ENABle?
Description Sets the value of the Operation Status enable register.
Parameters
If you specify a parameter value beyond the valid range, the command assumes a bit-by-bit
logical product (AND) with 32767 (0x7fff).
Query response {numeric}<newline><^END>
See also *SRE on page 207
:STAT:PRES on page 301
Equivalent key
sequence
No equivalent keys are available on the front panel.
<numeric>
Description Value of enable register
Range 0 to 32767
Default 0
Resolution 1