Specifications

284 Chapter 16
Command Reference
:HCOP
:HCOP
Syntax :HCOPy[:IMMediate]
Description Outputs the data selected with the :HCOP:CONT command to the printer connected to the
4287A. (No query)
See also :HCOP:CONT on page 284
Equivalent key
sequence
[Display] - PRINT MENU - PRINT
:HCOP:ABOR
Syntax :HCOPy:ABORt
Description Aborts print operation. (No query)
Equivalent key
sequence
[Display] - PRINT MENU - ABORT PRINTING
:HCOP:CONT
Syntax :HCOPy:CONTent {SCReen|SETup|LIST}
:HCOPy:CONTent?
Description Lets you select what to print.
Parameters
Query response {SCR|SET|LIST}<newline><^END>
See also :HCOP on page 284
Equivalent key
sequence
[Display] - PRINT MENU - CONTENT
Description
SCReen
(initial value)
Instructs the bitmap images
*1
from the non-volatile memory (clipboard). If
no image resides on the clipboard, the image currently displayed on screen
is transferred to the clipboard before it is output to the printer. When you
are working with the measurement results for single-point measurement,
you can choose this item to output the data as an image.
SETup Instructs the instrument to output the active table contents, which can
contain a measurement point setup table, calibration kit setup table,
compensation kit setup table, and BIN sorting setup table.
LIST Instructs the instrument to output the measurement results of list
measurement across all of the measurement points. You cannot output this
data when you are working with the results of single-point measurement.
*1. This is the image that is displayed before you press the
[Capture] key
(
[Display] key).