Specifications

278 Chapter 16
Command Reference
:DISP:TEXT2:LAB{1-4}
:DISP:TEXT2:LAB{1-4}
Syntax :DISPlay[:WINDow]:TEXT2:LABel{1|2|3|4} {PARam1|PARam2|PARam3|PARam4|
VMONitor|IMONitor|FREQuency|AVERage|POWer|RDC}
Description Defines each of the four display items (:LAB1 through :LAB4) that appear on the list
measurement screen.
Parameters
Display item 1 defaults to PARam1; display item 2 defaults to PARam2; display item 3
defaults to PARam3; display item 4 defaults to PARam4.
Query response {PAR1|PAR2|PAR3|PAR4|VMON|IMON|FREQ|AVER|POW|RDC}<newline><^END>
See also :SOUR:LIST:STAT on page 297
Equivalent key
sequence
[Prmtr] - SETUP LIST PRMTRS - {LABEL-1|LABEL-2|LABEL-3|LABEL-4} -
{
PRMTR-1|PRMTR-2|PRMTR-3|PRMTR-4|V-mon|I-mon|FREQ|AVG|POWER|R_dc}
Description
PARam1 Displays parameter 1 measurement result
PARam2 Displays parameter 2 measurement result
PARam3 Displays parameter 3 measurement result
PARam4 Displays parameter 4 measurement result
VMONitor Displays result of monitoring the test signal voltage level
IMONitor Displays result of monitoring the test signal current level
FREQuency Displays frequency setting of the test signal
AVERage Displays averaging factor setting
POWer Displays test signal level setting
RDC Displays result of R
dc
measurement