Specifications

Chapter 16 275

Command Reference

:DISP:TEXT1:CALC13:MSD

16. Command Reference

:DISP:TEXT1:CALC13:MSD

Syntax :DISPlay[:WINDow]:TEXT1:CALCulate13:MSD <numeric>

:DISPlay[:WINDow]:TEXT1:CALCulate13:MSD?

Description When the instrument is configured to fix the decimal point in the screen display of the

results of R

measurement, use this command to set the most significant digit. You can

specify the most significant digit by its exponent. For example, to set the most significant

digit to 100 (1E2), specify 2 as the parameter value.

Parameters

If your specified parameter is beyond the valid range, the instrument ignores the parameter

and uses either the maximum or minimum value depending on whether the parameter is

greater than the upper limit or smaller than the lower limit.

Query response {numeric}<newline><^END>

Equivalent key

sequence

[Display] - SETUP MEAS DISP - R_dc - MODIFY MSD

Description Exponent that indicates the most significant digit

Range -15 to 15

Default 0

Resolution 1