Specifications

274 Chapter 16

Command Reference

:DISP:TEXT1:CALC13:DIG

Syntax :DISPlay[:WINDow]:TEXT1:CALCulate13:DIGit <numeric>

:DISPlay[:WINDow]:TEXT1:CALCulate13:DIGit?

Description Specifies the number of digits to use in the screen display of the results of R

measurement.

Parameters

If your specified parameter is beyond the valid range, the instrument ignores the parameter

and uses either the maximum or minimum value depending on whether the parameter is

greater than the upper limit or smaller than the lower limit.

Query response {numeric}<newline><^END>

Equivalent key

sequence

[Display] - SETUP MEAS DISP - R_dc - DIGIT

:DISP:TEXT1:CALC13:FIX

Syntax :DISPlay[:WINDow][:TEXT1]:CALCulate13:FIX {ON|OFF|1|0}

:DISPlay[:WINDow][:TEXT1]:CALCulate13:FIX?

Description Specifies whether to fix the decimal point in the screen display of the results of R

measurement.

Parameters

Query response {1|0}<newline><^END>

Equivalent key

sequence

[Display] - SETUP MEAS DISP - R_dc - MSD FIXED

Description Number of digits

Range 4 to 6

Default 4

Resolution 1

Description

ON or 1 Instructs instrument to fix the decimal point

OFF or 0 (initial value) Instructs instrument NOT to fix the decimal point