Specifications

Chapter 16 271
Command Reference
:DISP:TEXT1:CALC{1-4}:FIX
16. Command Reference
:DISP:TEXT1:CALC{1-4}:FIX
Syntax :DISPlay[:WINDow]:TEXT1:CALCulate{1|2|3|4}:FIX {ON|OFF|1|0}
:DISPlay[:WINDow]:TEXT1:CALCulate{1|2|3|4}:FIX?
Description Specifies whether to fix the decimal point in the screen display of the measurement result
for each of parameters 1 (:CALC1) through 4 (:CALC4).
Parameters
Query response {1|0}<newline><^END>
Equivalent key
sequence
[Display] - SETUP MEAS DISP - {PRMTR-1|PRMTR-2|PRMTR-3|PRMTR-4} -
MSD FIXED
:DISP:TEXT1:CALC{1-4}:MSD
Syntax :DISPlay[:WINDow]:TEXT1:CALCulate{1|2|3|4}:MSD <numeric>
:DISPlay[:WINDow]:TEXT1:CALCulate{1|2|3|4}:MSD?
Description When the instrument is configured to fix the decimal point in the screen display of the
measurement result for each of the parameters 1 (:CALC1) through 4 (:CALC4), use this
command to set the most significant digit. You can specify the most significant digit by its
exponent. For example, to set the most significant digit to 100n (1E-7), specify -7 as the
parameter value.
Parameters
If your specified parameter is beyond the valid range, the instrument ignores the parameter
and uses either the maximum or minimum value depending on whether the parameter is
greater than the upper limit or smaller than the lower limit.
Query response {numeric}<newline><^END>
Equivalent key
sequence
[Display] - SETUP MEAS DISP - {PRMTR-1|PRMTR-2|PRMTR-3|PRMTR-4} -
MODIFY MSD
Description
ON or 1 Instructs instrument to fix the decimal point
OFF or 0 (initial value) Instructs instrument NOT to fix the decimal point
<numeric>
Description Exponent that indicates the most significant digit
Range -15 to 15
Default 0
Resolution 1