Specifications

266 Chapter 16
Command Reference
:DATA:RCMD{1-2}?
:DATA:RCMD{1-2}?
Syntax :DATA[:DATA]:RCMD{1|2}?
Description Returns a set of measurement data (real number) for calculating the compensation
coefficients to use during R
dc
measurement. The instrument holds two sets of calculation
data, which are obtained by measuring the OPEN and SHORT standards. To obtain a
particular data set, suffix the command with the number that corresponds to the desired
data set. The following table lists the command suffix numbers associated with the
respective data set: (Query only)
1: OPEN measurement data
2: SHORT measurement data
Query response {numeric}<newline><^END>
Equivalent key
sequence
No equivalent keys are available on the front panel.
:DATA:RCMP{1-3}
Syntax :DATA[:DATA]:RCMP{1|2|3} <numeric>
:DATA[:DATA]:RCMP{1|2|3}?
Description Sets or returns a compensation coefficient for R
dc
measurement (see “Rdc compensation
coefficients and compensation data” on page 84). To set or obtain a particular coefficient,
suffix the command with the number that corresponds to the desired coefficient. The
following table lists the command suffix numbers associated with each coefficient:
1: Compensation coefficient A for R
dc
measurement
2: Compensation coefficient B for R
dc
measurement
3: Compensation coefficient C for R
dc
measurement
Parameters
Query response {numeric}<newline><^END>
Equivalent key
sequence
No equivalent keys are available on the front panel.
Description
<numeric> Compensation coefficient (real number) for R
dc
measurement