Specifications

Chapter 16 261
Command Reference
:DATA:CMD{1-2}?
16. Command Reference
:DATA:CMD{1-2}?
Syntax :DATA[:DATA]:CMD{1|2}?
Description Returns a compensation data array (an array of measurement data obtained for calculating
the compensation coefficients; see “Compensation Data Arrays” on page 81). The
instrument holds two compensation data arrays that correspond to the OPEN and SHORT
standards. To obtain a particular array, suffix the command with the number that
corresponds to the desired array. The following table lists the command suffix numbers
associated with each array: (Query only)
1: Array that corresponds to measurement data for the OPEN standard
2: Array that corresponds to measurement data for the SHORT standard
Query response {numeric 1},...,{numeric N´2}<newline><^END>
The command returns the real and imaginary parts of the measurement data (complex
number) obtained at each measurement point. Therefore, the number of returned values is
equal to N´2, where N represents the number of points defined in the active table while n
represents an integer between 1 and N.
Equivalent key
sequence
No equivalent keys are available on the front panel.
Description
{numeric n´2-1} Real part of measurement data (complex number) obtained at nth
point
{numeric n´2} Imaginary part of measurement data (complex number) obtained
at nth point