Specifications

Chapter 16 253

Command Reference

:CORR2:COLL:DC

16. Command Reference

:CORR2:COLL:DC

Syntax [:SENSe]:CORRection2:COLLect[:ACQuire]:DC {STAN1|STAN2}

[:SENSe]:CORRection2:COLLect[:ACQuire]:DC?

Description Obtains the data for calculating the compensation coefficients to use during R

measurement performed with the specified standard. The data is obtained for only the

active table. This command is valid only when the calibration mechanism is on; otherwise,

the command fails and an error is generated. (No query)

NOTE The measurement to obtain the data is not started by execution of this command. You must

trigger the instrument after execution of this command when the trigger source is not set to

internal trigger (Int).

Parameters