Specifications

Chapter 16 245

Command Reference

:CORR1:COLL:DC

16. Command Reference

:CORR1:COLL:DC

Syntax [:SENSe]:CORRection1:COLLect[:ACQuire]:DC {STAN1|STAN2|STAN3}

Description Obtains the data for calculating the calibration coefficients to use during R

measurement

performed with the specified standard. The data is obtained for only the active table. (No

query)

NOTE The measurement to obtain the data is not started by execution of this command. You must

trigger the instrument after execution of this command when the trigger source is not set to

internal trigger (Int).

Parameters