Specifications

Chapter 16 243
Command Reference
:CORR1:CKIT:STAN3:LIST
16. Command Reference
• Definitions based on Cp and D values
If your specified parameter is beyond the valid range, the instrument ignores the parameter
and uses either the maximum or minimum value depending on whether the parameter is
greater than the upper limit or smaller than the lower limit.
Query response {numeric 2},{numeric 3}<newline><^END>
See also :CORR1:CKIT:LIST on page 232
:CORR1:CKIT:STAN3:FORM on page 241
:CORR1:CKIT:STAN1:LIST on page 235
:CORR1:CKIT:STAN2:LIST on page 238
Equivalent key
sequence
[Setup View] (Calibration kit setup display)
<numeric 1> <numeric 2> <numeric 3>
Description Measurement point number Cp D
Range 1 to number of points (up to
32)
-1E6 to 1E6 -1E6 to 1E6
Default 1 0 0
Unit None F (farad) None
Resolution 1 1E-18 1E-18