Specifications

240 Chapter 16

Command Reference

:CORR1:CKIT:STAN3:EDEL

Syntax [:SENSe]:CORRection1:CKIT:STANdard3:EDELay[:TIME] <numeric>

[:SENSe]:CORRection1:CKIT:STANdard3:EDELay[:TIME]?

Description Defines the offset delay time of the LOAD standard of the user-defined calibration kit. This

value applies to all measurement points regardless of the setting specified with the

:CORR1:CKIT:LIST command on page 232.

Parameters

If your specified parameter is beyond the valid range, the instrument ignores the parameter

and uses either the maximum or minimum value depending on whether the parameter is

greater than the upper limit or smaller than the lower limit.

Query response {numeric}<newline><^END>

See also :CORR1:CKIT:STAN1:EDEL on page 234

:CORR1:CKIT:STAN2:EDEL on page 237

Equivalent key

sequence

[Setup View] (Calibration kit setup display)

Description Offset delay time

Range -1E6 to 1E6

Default 0

Unit s (seconds)

Resolution 1E-18