Specifications

Chapter 16 237
Command Reference
:CORR1:CKIT:STAN2:EDEL
16. Command Reference
:CORR1:CKIT:STAN2:EDEL
Syntax [:SENSe]:CORRection1:CKIT:STANdard2:EDELay[:TIME] <numeric>
[:SENSe]:CORRection1:CKIT:STANdard2:EDELay[:TIME]?
Description Defines the offset delay time of the SHORT standard of the user-defined calibration kit.
This value applies to all measurement points regardless of the setting specified with the
:CORR1:CKIT:LIST command on page 232.
Parameters
If your specified parameter is beyond the valid range, the instrument ignores the parameter
and uses either the maximum or minimum value depending on whether the parameter is
greater than the upper limit or smaller than the lower limit.
Query response {numeric}<newline><^END>
See also :CORR1:CKIT:STAN1:EDEL on page 234
:CORR1:CKIT:STAN3:EDEL on page 240
Equivalent key
sequence
[Setup View] (Calibration kit setup display)
<numeric>
Description Offset delay time
Range -1E6 to 1E6
Default 0
Unit s (seconds)
Resolution 1E-18